Aluminum Shiny Black Plates 18x24

Developer for collodion positives. Basic developer for working with collodion plates. It gives a rather warm tone to the image. Developer is ready to use. Contains: Ferrous sulfate, Organic acids, Ethanol, Distilled water

Developer for collodion negatives. Very acidic developer working cleanly. Developer is ready to use. Contains: Ferrous sulfate, Inorganic acids, Organic acids, Ethanol, Distilled water

Developer for ambrotype, tintype and collodion negative. It gives a rather warm image. Developer is ready to use. Contains: Ferrous sulfate, Copper sulphate, Organic acids, Ethanol

Contains: Cadmium Bromide, Potassium Iodide, Ether, Ethanol, Collodion

"Cadmium Free"  Contains: Lithium Bromide, Potassium Iodide, Ammonium Iodide, Ether, Ethanol, Collodion  

Developer for collodion positives. Contrast clean image, without veils. Ideal development time 10-15 sec. The color of the image is rather cold white. Developer is ready to use. Contains: Ferrous sulfate, Copper sulphate, Inorganic acids, Ethanol, Distilled water

Glass plate, edges without grinding Exact size: 178x238mm Thickness: 2mm Pack: 10 pieces

Black aluminum semi-gloss plate  with protective film suitable for wet collodion process. This dimension is not suitable for Chamonix 5x7 wet plate holder. Exact size: 128x178mm Thickness: 0.6mm

"Cadmium Free"   Contains: Potassium Bromide, Ammonium Iodide, Ether, Ethanol, Collodion

Collodion set IV. is for creating ambrotype and ferrotype (collodion positive). This set not contains silver bath (sensitizer) Therefore is for users which already have silver bath.  Collodion set IV. contains: Premixed Collodion LILIANA, Developer MD9, Fixer, Sandarack varnish Ready to use immediately!

Developer for collodion positives. One of the oldest developer recipes for working with collodion positives. It gives a cold image. Developer is ready to use. Contains: Ferrous sulfate, Barium nitrate, Inorganic acids, Ethanol, Distilled water

Volume 500ml

Contains:A - Copper sulfate solution 400 ml;B - Potassium Bromide solution 400 ml;C - Silver nitrate and Nitric acid solution 400 ml;

Collodion set II. is for creating ambrotype and ferrotype (collodion positive). Collodion set II. contains: Premixed Collodion Lea no.2, Developer MD-6, Fixer, Sandarack varnish, Senzitizer We recommend for beginners and advanced ones

Contains: Cadmium Bromide, Ammonium Iodide, Ether, Ethanol, Collodion

Fixer Tank for collodion plates 5x7 inch (13x18 cm) or smaller Inside dimension: 22,5cm x 15,0cm x 2,0cmMaterial: container - wood, bath - glass, dipper - plexiglass The volume of solution required for board 5x7 inches or 13x18 cm  is 650 ml