Developer MD8 - 500ml
Developer for collodion positives.
A developer working in contrast without a tendency to veil. It gives a very cold tone to the image.
Developer is ready to use.
Contains: Ferrous sulfate, Copper sulfate, Potassium nitrate, Inorganic acids, Ethanol, Distilled water
Customers who bought this product also bought:
Fixer Tank 57
Fixer Tank for collodion plates 5x7 inch (13x18 cm) or smaller Inside dimension: 22,5cm x 15,0cm x 2,0cmMaterial: container - wood, bath - glass, dipper - plexiglass
The volume of solution required for board 5x7 inches or 13x18 cm is 650 ml
€193.00
In Stock
Developer Negative - 500ml
Developer for collodion negative.
Developer is ready to use
Contains: Ferrous sulphate, Organic acid, Ethanol, Distilled water
€20.96
In Stock
Aluminum Shiny Black Plates 18x24
Black aluminum shiny plate with protective film suitable for wet collodion process.
Exact size: 178x238mm
Thickness:0.6mm
€5.17
In Stock
Travel wooden box 4x5
Travel wooden box for 30 pcs plates
Suitable for plates: 9x12 cm, 4x5 inch and smaller
Adjustable width of rack
€147.95
Last items in stock
Sensitizer for Cyanotype 2x100ml
Solution A 100 ml (potassium ferrocyanide) + solution B 100 ml (ferric ammonium citrate green)
€28.20
In Stock
SILVER BATH TANK 45
Silver Bath Tank for collodion plates 4x5 inch (99x122mm) or smaller Inside dimension: 15cm x12cm x 1,7cmMaterial: container - wood, bath - glass, dipper - plexiglass
The volume of solution required for plate 4x5 inches is 270 ml
€121.93
In Stock
15 other products in the same category:
Developer Positive Standard - 500ml
Developer for collodion positives.
Basic developer for working with collodion plates. It gives a rather warm tone to the image.
Developer is ready to use.
Contains: Ferrous sulfate, Organic acids, Ethanol, Distilled water
€20.96
In Stock
Developer MD2 - 500ml
Developer for collodion negatives.
Very acidic developer working cleanly.
Developer is ready to use.
Contains: Ferrous sulfate, Inorganic acids, Organic acids, Ethanol, Distilled water
€20.96
In Stock
Developer MD5 - 500ml
Developer for collodion positives.
A developer working in contrast without a tendency to veils. Provides a cold image tone.
Developer is ready to use.
Contains: Ferrous sulfate, Copper sulphate, Potassium nitrate, Inorganic acids, Ethanol, Distilled water
€20.96
In Stock
Developer Negative - 500ml
Developer for collodion negative.
Developer is ready to use
Contains: Ferrous sulphate, Organic acid, Ethanol, Distilled water
€20.96
In Stock
Developer Power - 490ml
Developer for collodion positives.
Developer is ready to use.
Contains: Ferrous sulphate, Organic acid, Inorganic acid, Ethanol, Potassium nitrate, Silver nitrate, Distilled water
€25.46
In Stock
Developer MD7 - 500ml
Developer for collodion positives.
Neutral, clean-working developer. Provides a warm image tone.
Developer is ready to use.
Contains: Ferrous sulfate, Potassium nitrate, Organic acids, Ethanol, Distilled water
€20.96
In Stock
Developer MD3 - 500ml
Developer for ambrotype, tintype and collodion negative.
It gives a rather warm image.
Developer is ready to use.
Contains: Ferrous sulfate, Copper sulphate, Organic acids, Ethanol
€20.96
In Stock
Developer ColdDay
Developer for collodion positives, special for cold days.
Developer is ready to use.
Contains: Ferrous sulfate, Organic acids, Ethanol, Distilled water
€20.96
In Stock
Developer MD4 - 480ml
Developer for collodion positives.
One of the oldest developer recipes for working with collodion positives. It gives a cold image.
Developer is ready to use.
Contains: Ferrous sulfate, Barium nitrate, Inorganic acids, Ethanol, Distilled water
€22.02
In Stock
Developer for Lea no.7 - 500ml
Developer specially developed for Lea no.7 collodion.
Developer is ready to use
Contains: Ferrous sulphate, Organic acid, Ethanol, Sugar, Distilled water
€20.96
In Stock
Developer MD10 - 500ml
Developer for collodion positives.
A contrast-working developer. Provides a very warm image tone.
Developer is ready to use.
Contains: Ferrous sulfate, Copper sulfate, Organic acids, Formic acid, Ethanol, Distilled water
€20.96
In Stock
Developer MD9 - 500ml
Developer for collodion positives.
A developer working in contrast without a tendency to veil. Provides a neutral image tone.
Developer is ready to use.
Contains: Ferrous sulfate, Copper sulfate, Potassium nitrate, Inorganic acids, Organic acids, Ethanol, Distilled water
€20.96
In Stock
Developer MD6 - 500ml
Developer for collodion positives.
A clean working developer. Provides a warm tone to the image.
Developer is ready to use.
Contains: Ferrous sulfate, Copper sulphate, Potassium nitrate, Organic acids, Ethanol, Distilled water
€20.96
In Stock
Developer MD1 - 500ml
Developer for collodion positives.
Contrast clean image, without veils. Ideal development time 10-15 sec. The color of the image is rather cold white.
Developer is ready to use.
Contains: Ferrous sulfate, Copper sulphate, Inorganic acids, Ethanol, Distilled water
€20.96
In Stock
Sugar Developer - 500ml
Developer for collodion positives.
Very powerful developer, giving a strong image. A veil may form during prolonged exposure. Gives the image a warm tone.
Developer is ready to use.
Contains: Ferrous sulfate, Sugar, Organic acids, Ethanol, Distilled water
€20.96
In Stock
Developer for collodion positives.
A developer working in contrast without a tendency to veil. It gives a very cold tone to the image.
Developer is ready to use.
Contains: Ferrous sulfate, Copper sulfate, Potassium nitrate, Inorganic acids, Ethanol, Distilled water