Clear glass plate 9x12 - pack 10pcs

Contains: Cadmium bromide, Cadmium Iodide, Ether, Ethanol, Collodion

Black aluminum semi-gloss plate  with protective film suitable for wet collodion process Exact size: 178x238mm Thickness: 0.6mm

Contains: Cadmium Bromide, Ammonium Bromide, Cadmium Iodide, Ammonium Iodide, Ether, Ethanol, Collodion

Collodion set Negative II. is for creating collodion glass negatives. Collodion set Negative II.: Premixed Collodion Negative Standard, Developer Negative, Fixer, Sandarack varnish, Senzitizer

Collodion set IV. is for creating ambrotype and ferrotype (collodion positive). This set not contains silver bath (sensitizer) Therefore is for users which already have silver bath.  Collodion set IV. contains: Premixed Collodion LILIANA, Developer MD9, Fixer, Sandarack varnish Ready to use immediately!

Black aluminum semi-gloss plate  with protective film suitable for wet collodion process Exact size: 201x251mm Thickness: 0.6mm

Fixer Tank for collodion plates 8x10 inch (20x25 cm) or smaller Inside dimension:  30cm x 21,5cm x 2,2cmMaterial: container - wood, bath - glass, dipper - plexiglass The volume of solution required for plate 8x10 inches is 1200 ml

Contains: Cadmium Bromide, Ammonium Iodide, Ether, Ethanol, Collodion

Developer for collodion positives. Very powerful developer, giving a strong image. A veil may form during prolonged exposure. Gives the image a warm tone. Developer is ready to use. Contains: Ferrous sulfate, Sugar, Organic acids, Ethanol, Distilled water

package 100 pcs

Silver Bath Tank for collodion plates 8x10 inch (20x25 cm) or smaller Inside dimension:  30cm x 21,5cm x 2,2cmMaterial: container - wood, bath - glass, dipper - plexiglass The volume of solution required for plate 8x10 inches is 1200 ml

Silver Bath Tank for collodion plates10x12 inch (25x30 cm) or smaller Inside dimension:  34cm x 26,5cm x 2,2cmMaterial: container - wood, bath - glass, dipper - plexiglass The volume of solution required for plate 10x12 inches is 1500 ml

9% solution of silver nitrate + nitric acid / 1000 ml Sensitizer is ready to use (do not dilute)

Sandarac varnish  for collodion plates. Contains: Sandarack, Ethanol, Lavender oil

Developer for collodion positives. Basic developer for working with collodion plates. It gives a rather warm tone to the image. Developer is ready to use. Contains: Ferrous sulfate, Organic acids, Ethanol, Distilled water

Developer for collodion positives. Contrast clean image, without veils. Ideal development time 10-15 sec. The color of the image is rather cold white. Developer is ready to use. Contains: Ferrous sulfate, Copper sulphate, Inorganic acids, Ethanol, Distilled water