Aluminum Semi-gloss Black Plates 18x24

Fixer Tank for collodion plates 8x10 inch (20x25 cm) or smaller Inside dimension:  30cm x 21,5cm x 2,2cmMaterial: container - wood, bath - glass, dipper - plexiglass The volume of solution required for plate 8x10 inches is 1200 ml

Glass plate, edges without grinding Exact size: 178x238mm Thickness: 2mm Pack: 10 pieces

Collodion set IV. is for creating ambrotype and ferrotype (collodion positive). This set not contains silver bath (sensitizer) Therefore is for users which already have silver bath.  Collodion set IV. contains: Premixed Collodion LILIANA, Developer MD9, Fixer, Sandarack varnish Ready to use immediately!

Glass plate, edges without grinding Exact size: 88x118mm Thickness: 2mm Pack: 10 pieces

Collodion set II. is for creating ambrotype and ferrotype (collodion positive). Collodion set II. contains: Premixed Collodion Extra Dry, Developer with sugar, Fixer, Sandarack varnish, Senzitizer

Developer for collodion positives. One of the oldest developer recipes for working with collodion positives. It gives a cold image. Developer is ready to use. Contains: Ferrous sulfate, Barium nitrate, Inorganic acids, Ethanol, Distilled water

Developer for collodion positives. A developer working in contrast without a tendency to veil. It gives a very cold tone to the image. Developer is ready to use. Contains: Ferrous sulfate, Copper sulfate, Potassium nitrate, Inorganic acids, Ethanol, Distilled water

Sandarac varnish  for collodion plates. Contains: Sandarack, Ethanol, Lavender oil

Engraved text: DEVELOPER 

Collodion set I. is for creating ambrotype and ferrotype (collodion positive). This set not contains silver bath (sensitizer) Therefore is for users which already have silver bath.  Collodion set I. contains: Premixed Collodion Extra Dry, Developer with sugar, Fixer, Sandarack varnish

Collodion set Negative I. is for creating collodion glass negatives. This set not contains silver bath (sensitizer) Therefore is for users which already have silver bath.  Collodion set Negative I. contains: Premixed Collodion Negative Standard, Developer Negative, Fixer, Sandarack varnish

Contains:A - Copper sulfate solution 400 mlB - Potassium bromide solution 400 ml

Black aluminum plate with protective film suitable for wet collodion process Exact size: 128x178mm Thickness: 0.6mm Due to Covid-19 disease at the sheet metal manufacturer, al. plates in stock in early April.

Contains: Cadmium bromide, Cadmium Iodide, Ether, Ethanol, Collodion

Developer for collodion negative. Developer is ready to use Contains: Ferrous sulphate, Organic acid, Ethanol, Distilled water

Developer specially developed for Lea no.7 collodion. Developer is ready to use Contains: Ferrous sulphate, Organic acid, Ethanol, Sugar, Distilled water