Developer MD4 - 480ml
Developer for collodion positives.
One of the oldest developer recipes for working with collodion positives. It gives a cold image.
Developer is ready to use.
Contains: Ferrous sulfate, Barium nitrate, Inorganic acids, Ethanol, Distilled water
Customers who bought this product also bought:
Silver Bath Tank for collodion plates10x12 inch (25x30 cm) or smaller Inside dimension: 34cm x 26,5cm x 2,2cmMaterial: container - wood, bath - glass, dipper - plexiglass
The volume of solution required for plate 10x12 inches is 1500 ml
€194.95
In Stock
Aluminum Semi-gloss Black Plates 8x10
Black aluminum semi-gloss plate with protective film suitable for wet collodion process
Exact size: 201x251mm
Thickness: 0.6mm
€5.45
In Stock
Distilled Water 1000ml
Clear liquid without color, taste and odor
Is intended:
- for laboratories (preparation of solutions and reagents)
- for photochemical processes
Specific electrical conductivity: max. 1 μS · cm-1
€1.14
In Stock
SILVER BATH TANK 45
Silver Bath Tank for collodion plates 4x5 inch (99x122mm) or smaller Inside dimension: 15cm x12cm x 1,7cmMaterial: container - wood, bath - glass, dipper - plexiglass
The volume of solution required for plate 4x5 inches is 270 ml
€88.05
In Stock
Collodion chemistry set II. - Standard
Collodion set II. is for creating ambrotype and ferrotype (collodion positive).
Collodion set II. contains:
Premixed Collodion New Guy Positive, Developer Positive Standard, Fixer, Sandarack varnish, Senzitizer
€198.49
In Stock
Fixer Tank 57
Fixer Tank for collodion plates 5x7 inch (13x18 cm) or smaller Inside dimension: 22,5cm x 15,0cm x 2,0cmMaterial: container - wood, bath - glass, dipper - plexiglass
The volume of solution required for board 5x7 inches or 13x18 cm is 650 ml
€139.36
In Stock
In Stock
15 other products in the same category:
Sugar Developer - 500ml
Developer for collodion positives.
Very powerful developer, giving a strong image. A veil may form during prolonged exposure. Gives the image a warm tone.
Developer is ready to use.
Contains: Ferrous sulfate, Sugar, Organic acids, Ethanol, Distilled water
€15.14
In Stock
Developer Power - 490ml
Developer for collodion positives.
Developer is ready to use.
Contains: Ferrous sulphate, Organic acid, Inorganic acid, Ethanol, Potassium nitrate, Silver nitrate, Distilled water
€15.91
In Stock
Developer MD5 - 500ml
Developer for collodion positives.
A developer working in contrast without a tendency to veils. Provides a cold image tone.
Developer is ready to use.
Contains: Ferrous sulfate, Copper sulphate, Potassium nitrate, Inorganic acids, Ethanol, Distilled water
€15.14
In Stock
Developer ColdDay
Developer for collodion positives, special for cold days.
Developer is ready to use.
Contains: Ferrous sulfate, Organic acids, Ethanol, Distilled water
€15.14
In Stock
Developer Positive Standard - 500ml
Developer for collodion positives.
Basic developer for working with collodion plates. It gives a rather warm tone to the image.
Developer is ready to use.
Contains: Ferrous sulfate, Organic acids, Ethanol, Distilled water
€15.14
In Stock
Developer for Lea no.7 - 500ml
Developer specially developed for Lea no.7 collodion.
Developer is ready to use
Contains: Ferrous sulphate, Organic acid, Ethanol, Sugar, Distilled water
€15.14
In Stock
Developer Negative - 500ml
Developer for collodion negative.
Developer is ready to use
Contains: Ferrous sulphate, Organic acid, Ethanol, Distilled water
€15.14
In Stock
Developer MD9 - 500ml
Developer for collodion positives.
A developer working in contrast without a tendency to veil. Provides a neutral image tone.
Developer is ready to use.
Contains: Ferrous sulfate, Copper sulfate, Potassium nitrate, Inorganic acids, Organic acids, Ethanol, Distilled water
€15.14
In Stock
Developer MD3 - 500ml
Developer for ambrotype, tintype and collodion negative.
It gives a rather warm image.
Developer is ready to use.
Contains: Ferrous sulfate, Copper sulphate, Organic acids, Ethanol
€15.14
In Stock
Developer MD1 - 500ml
Developer for collodion positives.
Contrast clean image, without veils. Ideal development time 10-15 sec. The color of the image is rather cold white.
Developer is ready to use.
Contains: Ferrous sulfate, Copper sulphate, Inorganic acids, Ethanol, Distilled water
€15.14
In Stock
Developer MD6 - 500ml
Developer for collodion positives.
A clean working developer. Provides a warm tone to the image.
Developer is ready to use.
Contains: Ferrous sulfate, Copper sulphate, Potassium nitrate, Organic acids, Ethanol, Distilled water
€15.14
In Stock
Developer MD8 - 500ml
Developer for collodion positives.
A developer working in contrast without a tendency to veil. It gives a very cold tone to the image.
Developer is ready to use.
Contains: Ferrous sulfate, Copper sulfate, Potassium nitrate, Inorganic acids, Ethanol, Distilled water
€15.14
In Stock
Developer MD2 - 500ml
Developer for collodion negatives.
Very acidic developer working cleanly.
Developer is ready to use.
Contains: Ferrous sulfate, Inorganic acids, Organic acids, Ethanol, Distilled water
€15.14
In Stock
Developer MD10 - 500ml
Developer for collodion positives.
A contrast-working developer. Provides a very warm image tone.
Developer is ready to use.
Contains: Ferrous sulfate, Copper sulfate, Organic acids, Formic acid, Ethanol, Distilled water
€15.14
In Stock
Developer MD7 - 500ml
Developer for collodion positives.
Neutral, clean-working developer. Provides a warm image tone.
Developer is ready to use.
Contains: Ferrous sulfate, Potassium nitrate, Organic acids, Ethanol, Distilled water
€15.14
In Stock