Aluminum Shiny Black Plates 8x10

Developer for ambrotype, tintype and collodion negative. It gives a rather warm image. Developer is ready to use. Contains: Ferrous sulfate, Copper sulphate, Organic acids, Ethanol

Contains: Whiting, Distilled Water, Ethanol

Contains: Cadmium Bromide, Ammonium Bromide, Ammonium Iodide, Ether, Ethanol, Collodion

Collodion set I. is for creating ambrotype and ferrotype (collodion positive). This set not contains silver bath (sensitizer) Therefore is for users which already have silver bath.  Collodion set I. contains: Premixed Collodion New Guy Positive, Developer Positive Standard, Fixer, Sandarack varnish

Black aluminum semi-gloss plate  with protective film suitable for wet collodion process. This dimension is not suitable for Chamonix 5x7 wet plate holder. Exact size: 128x178mm Thickness: 0.6mm

"Cadmium Free"   Contains: Potassium Bromide, Ammonium Iodide, Ether, Ethanol, Collodion

Clear glass plate 2mm suitable for wet collodion process. If you want to order non-standard sizes plates, it is necessary to order a entire board and write a note when ordering your desired exact plate size under which the glass cutting. Order processing time on request.

Contains: Cadmium bromide, Cadmium Iodide, Ether, Ethanol, Collodion

Glass plate, edges without grinding Exact size: 178x238mm Thickness: 2mm Pack: 10 pieces

Fixer Tank for collodion plates 8x10 inch (20x25 cm) or smaller Inside dimension:  30cm x 21,5cm x 2,2cmMaterial: container - wood, bath - glass, dipper - plexiglass The volume of solution required for plate 8x10 inches is 1200 ml

"Cadmium Free"  Contains: Lithium Bromide, Potassium Iodide, Ammonium Iodide, Ether, Ethanol, Collodion  

Developer for collodion positives. Contrast clean image, without veils. Ideal development time 10-15 sec. The color of the image is rather cold white. Developer is ready to use. Contains: Ferrous sulfate, Copper sulphate, Inorganic acids, Ethanol, Distilled water

Contains: Ammonium Bromide, Cadmium Iodide, Ether, Ethanol, Collodion

Contains:A - Copper sulfate solution 400 mlB - Potassium bromide solution 400 ml

Developer for collodion negative. Developer is ready to use Contains: Ferrous sulphate, Organic acid, Ethanol, Distilled water

Collodion set II. is for creating ambrotype and ferrotype (collodion positive). Collodion set II. contains: Premixed Collodion Lea no.2, Developer MD-6, Fixer, Sandarack varnish, Senzitizer We recommend for beginners and advanced ones